# United States tariff line 7228.50.50.40: With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm

> In the United States tariff, line 7228.50.50.40 covers other bars and rods, not further worked than cold-formed or cold-finished, with a diameter or cross section measuring 76 mm or more but not exceeding 228 mm. Goods under this line enter free of general (MFN) duty. It falls under HS subheading 7228.50 in heading 72.28 (chapter 72).

Source: https://border.bot/countries/united-states/hs-codes/7228505040
Last updated: 9 October 2026

[Countries](https://border.bot/countries) / [United States](https://border.bot/countries/united-states) / [Chapter 72](https://border.bot/countries/united-states/hs-codes/72) / [7228.50](https://border.bot/countries/united-states/hs-codes/722850) / [7228.50.50.40](https://border.bot/countries/united-states/hs-codes/7228505040)

## Key facts

- Tariff line: 7228.50.50.40
- Covers: Other bars and rods, not further worked than cold-formed or cold-finished, with a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
- Duty (MFN): Free
- Additional duties: None recorded
- Restrictions: None recorded
- Tariff: [United States](https://border.bot/countries/united-states)
- HS subheading: [7228.50](https://border.bot/hs-codes/722850)

## What this line covers

In the United States tariff, line 7228.50.50.40 covers other bars and rods, not further worked than cold-formed or cold-finished, with a diameter or cross section measuring 76 mm or more but not exceeding 228 mm.

Its legal text is “With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm”, read under “Other bars and rods, not further worked than cold-formed or cold-finished”, “Other” and “Other”.

## How it is structured

It falls under HS subheading 7228.50 in heading 72.28 (chapter 72). The first six digits are the Harmonized System code; the 4 digits after them are added by the United States tariff.

- Chapter 72: Iron and steel
- Heading 72.28: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
- Subheading 7228.50: Other bars and rods, not further worked than cold-formed or cold-finished
- Within the subheading: Other
- Within the subheading: Other
- Line 7228.50.50.40: With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm

## Duty

Goods under this line enter free of general (MFN) duty.

The rate is published on 7228.50.50.

## In other countries

No other national tariff on border.bot has live lines under 7228.50 yet.

- [The Harmonized System text for 7228.50](https://border.bot/hs-codes/722850)

## Other lines under 7228.50

- [7228.50.10.10](https://border.bot/countries/united-states/hs-codes/7228501010) Of ball-bearing steel
- [7228.50.10.20](https://border.bot/countries/united-states/hs-codes/7228501020) Of round or rectangular cross section with surfaces ground, milled or polished
- [7228.50.10.40](https://border.bot/countries/united-states/hs-codes/7228501040) Other
- [7228.50.10.60](https://border.bot/countries/united-states/hs-codes/7228501060) Of round or rectangular cross section with surfaces ground, milled or polished
- [7228.50.10.80](https://border.bot/countries/united-states/hs-codes/7228501080) Other
- [7228.50.50.05](https://border.bot/countries/united-states/hs-codes/7228505005) Of high-nickel alloy steel
- [7228.50.50.15](https://border.bot/countries/united-states/hs-codes/7228505015) With a diameter or cross section measuring less than 76 mm
- [7228.50.50.70](https://border.bot/countries/united-states/hs-codes/7228505070) With a diameter or cross section exceeding 228 mm

- Previous line: [7228.50.50.15](https://border.bot/countries/united-states/hs-codes/7228505015) With a diameter or cross section measuring less than 76 mm
- Next line: [7228.50.50.70](https://border.bot/countries/united-states/hs-codes/7228505070) With a diameter or cross section exceeding 228 mm

## Frequently asked questions

### What does tariff line 7228.50.50.40 cover in the United States tariff?

In the United States tariff, line 7228.50.50.40 covers other bars and rods, not further worked than cold-formed or cold-finished, with a diameter or cross section measuring 76 mm or more but not exceeding 228 mm.

### What is the general (MFN) duty on 7228.50.50.40 in the United States?

Goods under this line enter free of general (MFN) duty. The rate is published on 7228.50.50.

## Sources and updates

The tariff lines for the United States come from border.bot release 1 (edition 2026HTSRev21), read from the publisher’s files, and have been live since 9 October 2026.

The duty rates for the United States come from border.bot release 1 (edition 2026HTSRev21), read from the publisher’s files, and have been live since 9 October 2026.

The trade programmes for the United States come from border.bot release 1 (edition 2026HTSRev21), read from the publisher’s files, and have been live since 9 October 2026.

This page was last updated on 9 October 2026.

Guidance from published tariff data, not a binding ruling. For a decision customs must follow, apply to the destination’s customs authority for a binding tariff ruling.

Official source files:

- https://hts.usitc.gov/reststop/exportList?from=0000000000&to=9999999999&format=CSV&styles=false

Machine-readable: https://border.bot/countries/united-states/hs-codes/7228505040.json