United States tariff line 7304.59.80.65: Having a wall thickness of 12.7 mm or more but less than 19 mm
Last updated
Key facts
- Tariff line
- 7304.59.80.65
- Covers
- Other, of circular cross section, of other alloy steel, having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm, having a wall thickness of 12.7 mm or more but less than 19 mm
- Duty (MFN)
- Free
- Additional duties
- None recorded
- Restrictions
- None recorded
- Tariff
- United States
- HS subheading
- 7304.59
Summary
In the United States tariff, line 7304.59.80.65 covers other, of circular cross section, of other alloy steel, having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm, having a wall thickness of 12.7 mm or more but less than 19 mm. Goods under this line enter free of general (MFN) duty. It falls under HS subheading 7304.59 in heading 73.04 (chapter 73).
What this line covers
In the United States tariff, line 7304.59.80.65 covers other, of circular cross section, of other alloy steel, having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm, having a wall thickness of 12.7 mm or more but less than 19 mm.
Its legal text is “Having a wall thickness of 12.7 mm or more but less than 19 mm”, read under “Other, of circular cross section, of other alloy steel”, “Other”, “Other”, “Other”, “Other” and “Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm”.
How it is structured
It falls under HS subheading 7304.59 in heading 73.04 (chapter 73). The first six digits are the Harmonized System code; the 4 digits after them are added by the United States tariff.
- Chapter 73
- Articles of iron or steel
- Heading 73.04
- Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
- Subheading 7304.59
- Other, of circular cross section, of other alloy steel
- Within the subheading
- Other
- Within the subheading
- Other
- Within the subheading
- Other
- Within the subheading
- Other
- Within the subheading
- Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- Line 7304.59.80.65
- Having a wall thickness of 12.7 mm or more but less than 19 mm
Duty
Goods under this line enter free of general (MFN) duty.
The rate is published on 7304.59.80.
Other lines under 7304.59
- 7304.59.10.00Suitable for use in the manufacture of ball or roller bearings
- 7304.59.20.30Of heat-resisting steel
- 7304.59.20.40Having an outside diameter less than 38.1 mm
- 7304.59.20.45Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm
- 7304.59.20.55Having an outside diameter exceeding 114.3 mm but less than 190.5 mm
- 7304.59.20.60Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm
- 7304.59.20.70Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm
- 7304.59.20.80Having an outside diameter exceeding 406.4 mm
- 7304.59.60.00Of heat-resisting steel
- 7304.59.80.10Having an outside diameter less than 38.1 mm
- 7304.59.80.15Having a wall thickness less than 6.4 mm
- 7304.59.80.20Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm
- 7304.59.80.25Having a wall thickness exceeding 12.7 mm
- 7304.59.80.30Having a wall thickness less than 12.7 mm
- 7304.59.80.35Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.59.80.40Having a wall thickness of 19 mm or more
- 7304.59.80.45Having a wall thickness less than 12.7 mm
- 7304.59.80.50Having a wall thickness of 12.7 mm or more but less than 19 mm
- 7304.59.80.55Having a wall thickness of 19 mm or more
- 7304.59.80.60Having a wall thickness less than 12.7 mm
- 7304.59.80.70Having a wall thickness of 19 mm or more
- 7304.59.80.80Having an outside diameter exceeding 406.4 mm
In other countries
No other national tariff on border.bot has live lines under 7304.59 yet.
Frequently asked questions
What does tariff line 7304.59.80.65 cover in the United States tariff?
In the United States tariff, line 7304.59.80.65 covers other, of circular cross section, of other alloy steel, having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm, having a wall thickness of 12.7 mm or more but less than 19 mm.
What is the general (MFN) duty on 7304.59.80.65 in the United States?
Goods under this line enter free of general (MFN) duty. The rate is published on 7304.59.80.
Sources and updates
The tariff lines for the United States come from border.bot release 1 (edition 2026HTSRev21), read from the publisher’s files, and have been live since 9 October 2026.
The duty rates for the United States come from border.bot release 1 (edition 2026HTSRev21), read from the publisher’s files, and have been live since 9 October 2026.
The trade programmes for the United States come from border.bot release 1 (edition 2026HTSRev21), read from the publisher’s files, and have been live since 9 October 2026.
This page was last updated on 9 October 2026.
Guidance from published tariff data, not a binding ruling. For a decision customs must follow, apply to the destination’s customs authority for a binding tariff ruling.
Official source files: