European Union tariff lines under HS 3921.19

The European Union tariff splits HS 3921.19 (cellular: Of other plastics) into 9 national lines: 3921 19 00 10 (for use in certain types of aircraft), 3921 19 00 30 (blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillers), 3921 19 00 50 (porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with - a total thickness of more than 0,05 mm but not more than 0,20 mm, - a water entry pressure between 5 and 200 kPa according to ISO 811, and - an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5), 3921 19 00 53 (sheets of closed-cell silicone foam with: -a thickness of 2,0 mm or more but not more than 4,8 mm, -a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518) -a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149)) and 5 others. The general (MFN) duty is 6.5% on all 9 lines.

• 3921 19 00 10For use in certain types of aircraftDuty: 6.5%
• 3921 19 00 30Blocks with cellular structure, containing by weight: - polyamide-6 or poly(epoxy anhydride) - 7 % or more but not more than 9 % of polytetrafluorethylene if present - 10 % or more but not more than 25 % of inorganic fillersDuty: 6.5%
• 3921 19 00 50Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with - a total thickness of more than 0,05 mm but not more than 0,20 mm, - a water entry pressure between 5 and 200 kPa according to ISO 811, and - an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5Duty: 6.5%
• 3921 19 00 53Sheets of closed-cell silicone foam with: -a thickness of 2,0 mm or more but not more than 4,8 mm, -a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518) -a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM- D149)Duty: 6.5%
• 3921 19 00 55Strip of microporous polytetrafluoroethylene on a support of a non-woven -wound on a roll on a core of 3 inches, -with a width of 69.5mm, 40.8mm, 36.5mm, 20mm, 13.5mm or 10mm for use in the manufacture of filters for kidney dialysis equipment and intravenous applicationDuty: 6.5%
• 3921 19 00 65Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the manufacture of alkaline battery separators with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 μm or more but not more than 36 μm,Duty: 6.5%
• 3921 19 00 75Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not laminated with a Polypropylene non-woven mat of 50 to 200 µm thickness, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μmDuty: 6.5%
• 3921 19 00 95Film of polyethersulfone, of a thickness of not more than 200 µmDuty: 6.5%
• 3921 19 00 99OtherDuty: 6.5%

• United States2 lines, used by 1 other country

The Harmonized System text for 3921.19