European Union tariff line 8507 90 31 20: Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 µm or more but not more than 36 µm

In the European Union tariff, line 8507 90 31 20 covers parts, separators, of plastic film of a thickness not exceeding 40 micrometres, separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 µm or more but not more than 36 µm. The general (MFN) duty rate is 2.7%. It falls under HS subheading 8507.90 in heading 85.07 (chapter 85).

Chapter 85

Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

Heading 85.07

Electric accumulators, including separators therefor, whether or not rectangular (including square)

Subheading 8507.90

Parts

Within the subheading

Separators

Within the subheading

Of plastic film of a thickness not exceeding 40 micrometres

Line 8507 90 31 20

Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with: -a width of 98 mm or more but not more than 170 mm, -a thickness of 15 µm or more but not more than 36 µm

• 8507 90 31 10For use in civil aircraft
• 8507 90 31 30Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with: -zero transversal production direction (TD) shrinkage, -a total thickness of 8 μm or more, but not more than 40 μm, -a width of 15 mm or more, but not more than 900 mm, -a length of more than 200 m, but not more than 8 000 m, -an average pore size between 0,02 μm and 0,1 μm, -whether or not coated with surfactant, -whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, -whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
• 8507 90 31 40Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer separator foil with: -one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides, -a width of 65 mm or more but not more than 170 mm, -a total thickness of 10 µm or more but not more than 30 µm, -a porosity of 25 % (vol.) or more but not more than 65 % (vol.)
• 8507 90 31 90Other
• 8507 90 39 10For use in civil aircraft
• 8507 90 39 90Other
• 8507 90 80 10For use in civil aircraft
• 8507 90 80 55Top cap or housing made of aluminium or ferrous alloy or stainless steel: -whether or not including parts made of aluminum and aluminium alloy, -with or without sealing elements or other elements made of polymer material, -with or without a "current interrupt device " and an "evacuation valve" -with or without plastic sockets -with an outer diameter of 17 mm or more, but not more than 18 mm, or rectangular with: -length not greater than 450 mm, -width not greater than 200 mm, and -hight not greater than 150 mm, for use in the manufacture of lithium-ion batteries
• 8507 90 80 90Other

• United States2 lines, used by 1 other country

The Harmonized System text for 8507.90