European Union tariff lines under HS 8708.50

The European Union tariff splits HS 8708.50 (drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof) into 30 national lines: 8708 50 20 15 (spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened), 8708 50 20 18 (propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of…), 8708 50 20 20 (transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg), 8708 50 20 25 (ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of s…) and 26 others.

• 8708 50 20 15Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
• 8708 50 20 18Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87
• 8708 50 20 20Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
• 8708 50 20 25Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
• 8708 50 20 35Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
• 8708 50 20 50Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
• 8708 50 20 55Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
• 8708 50 20 70Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
• 8708 50 20 75Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
• 8708 50 20 80Specific pre-assembled or ready-to assemble sections for new mobile cranes
• 8708 50 20 90Other
• 8708 50 35 11Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 4.5%
• 8708 50 35 90OtherDuty: 4.5%
• 8708 50 55 11Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 4.5%
• 8708 50 55 20Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87Duty: 4.5%
• 8708 50 55 50Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardenedDuty: 4.5%
• 8708 50 55 91Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 4.5%
• 8708 50 55 99OtherDuty: 4.5%
• 8708 50 91 10Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87Duty: 4.5%
• 8708 50 91 11Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 4.5%
• 8708 50 91 90OtherDuty: 4.5%
• 8708 50 99 10Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kgDuty: 3.5%
• 8708 50 99 25Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil groovesDuty: 3.5%
• 8708 50 99 35Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degreesDuty: 3.5%
• 8708 50 99 40Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87Duty: 3.5%
• 8708 50 99 45Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardenedDuty: 3.5%
• 8708 50 99 50Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardenedDuty: 3.5%
• 8708 50 99 60Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardenedDuty: 3.5%
• 8708 50 99 70Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 3.5%
• 8708 50 99 90OtherDuty: 3.5%

• United States19 lines, used by 1 other country

The Harmonized System text for 8708.50