Key facts
- HS subheading
- 8708.99
- National lines
- 15
- Import VAT/GST in the European Union
- VAT 21%
- De minimis in the European Union
- Flat €3 duty up to €150; tax always charged
- Tariff
- European Union
- Chapter
- 87: Vehicles other than railway or tramway rolling stock, and parts and accessories thereof
Summary
The European Union tariff splits HS 8708.99 (other parts and accessories: Other) into 15 national lines: 8708 99 10 55 (silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film), 8708 99 10 60 (aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1…), 8708 99 10 80 (specific pre-assembled or ready-to assemble sections for new mobile cranes), 8708 99 10 90 (other) and 11 others.
European Union lines under 8708.99
The European Union tariff splits HS 8708.99 (other parts and accessories: Other) into 15 national lines: 8708 99 10 55 (silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film), 8708 99 10 60 (aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1…), 8708 99 10 80 (specific pre-assembled or ready-to assemble sections for new mobile cranes), 8708 99 10 90 (other) and 11 others.
- 8708 99 10 55Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film
- 8708 99 10 60Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles
- 8708 99 10 80Specific pre-assembled or ready-to assemble sections for new mobile cranes
- 8708 99 10 90Other
- 8708 99 93 11Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 4.5%
- 8708 99 93 90OtherDuty: 4.5%
- 8708 99 97 22Silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective filmDuty: 3.5%
- 8708 99 97 27Inner pole electromagnet core used in Magneto-Rheological engine mounts to reduce shocks and for isolation and damping in passenger cars: -of a powder metal assembly, -with a diameter of not more than 90,95 mm, -with an overall height of 24,5 mm, -impregnated with sealant, -zinc platedDuty: 3.5%
- 8708 99 97 43Outer tie rod with a housing made of AISI 4137 (SCM435) steel or EN10083/2- C45R N steel or JIS G4053-SCM435 low alloy steel, with: -a ball stud made of EN 10263/4 - 41CrS4 Q T steel or AISI 4137 (SCM435) steel or EN10083/3-42CrMoS4Q T steel or JIS G4053-SCM435 low alloy steel, -a polyoxymethylene plastic ball seat, -a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm, -a ball stud diameter of 21,98 mm or more but no more than 22 mm, -a threaded hole depth of 40,5 mm or more but no more than 52 mm with dimensions M14x1,5, -a boot seal, -a boot seal protector and retaining ring, -lubricant, for use in the manufacture of vehicle's steering systemDuty: 3.5%
- 8708 99 97 50Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm, -outer porosity not more than 2 mm, -rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehiclesDuty: 3.5%
- 8708 99 97 53Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the suspension components: -made of aluminum, rubber, and plastic, -with a height of 270 mm or more, but not more than 300 mm, -with a width of 50 mm or more, but not more than 65 mm, -with a length of 150 mm or more, but not more than 170 mm, for use in the manufacture of motor vehiclesDuty: 3.5%
- 8708 99 97 58Mounting bracket of front radiator or intercooler: -made of iron or steel or of plastics, -whether or not with rubber cushioning, for use in the manufacture of goods of heading 8708Duty: 3.5%
- 8708 99 97 75Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87Duty: 3.5%
- 8708 99 97 80Specific pre-assembled or ready-to assemble sections for new mobile cranesDuty: 3.5%
- 8708 99 97 90OtherDuty: 3.5%
Import VAT and de minimis in the European Union
The European Union charges VAT on imports at a standard rate of 21%.
From 1 July 2026 until 1 July 2028, consignments sold to buyers in the European Union worth up to €150 pay a flat customs duty of €3 per tariff classification in the consignment instead of the tariff rate. Import tax is charged whatever the value.
In other countries
National tariff lines under 8708.99 are live on border.bot for the United States (21 lines, also used by 1 other country).
- United States21 lines, used by 1 other country
Frequently asked questions
How many national tariff lines does the European Union tariff have under HS 8708.99?
The European Union tariff splits HS 8708.99 (other parts and accessories: Other) into 15 national lines: 8708 99 10 55 (silicone or plastic keyboards, comprising: -parts of common metal, and -whether or not comprising parts of plastic, -epoxy resin reinforced with fiberglass or wood, -whether or not printed or surface-treated, -with or without electrical conductors, -with or without a membrane bonded to the keyboard, -with or without mono or multilayer protective film), 8708 99 10 60 (aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm, -width of more than 10 mm but not more than 250 mm, -length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1…), 8708 99 10 80 (specific pre-assembled or ready-to assemble sections for new mobile cranes), 8708 99 10 90 (other) and 11 others.
Sources and updates
The tariff lines for the European Union come from border.bot release 1, read from the publisher’s files, and have been live since 11 October 2026.
The duty rates for the European Union come from border.bot release 1, read from the publisher’s files, and have been live since 11 October 2026.
The trade programmes for the European Union come from border.bot release 1, read from the publisher’s files, and have been live since 11 October 2026.
The import taxes for the European Union come from border.bot release 1, imported from a file, and have been live since 9 October 2026.
The de minimis thresholds for the European Union come from border.bot release 2, entered by border.bot, and have been live since 11 October 2026.
This page was last updated on 11 October 2026.
Guidance from published tariff data, not a binding ruling. For a decision customs must follow, apply to the destination’s customs authority for a binding tariff ruling.